Stream Type: There are four types to identify different streams you have set. If select the HD Mode, the
clearer video will become, and it will take up more bandwidth.
Resolution: The camera supports multiple types, For example: 2K, 1080P, 720P, VGA. The higher the
resolution is, the clearer video will become. But the code flux will become larger too, and it will take up
more bandwidth. (Different models support different specific types. )
Bit Rate: Generally speaking, the larger the bit rate is, the clearer video will become. But the bit rate
configuration should combine well with the network bandwidth. When the bandwidth is very narrow, and
bit rate is large, that will lead to video can not play well.
Frame Rate: Note that a larger frame size takes up more bandwidth. You should lower frame rate when
the bandwidth is limited. Normally, when the frame rate above 15, you can achieve fluently video.The
maximum frame rate for each model is different.
Key Frame Interval: The time between last key frame and next key frame. The shorter the duration, the
more likely you will get a better video quality, but at the cost of higher network bandwidth consumption.
Variable bitate:Tthe camera will change the video bit rate according to the situation, but will not more
than the maximum parameter "Bit Rate". You can select "Yes" or "No" " to turn on and off Variable Bitate
3.7.5.2 On Screen Display
This page is used to add timestamp and device name on the video.
Display Timestamp: There are two options: Yes or NO. Select Yes and you can see the system date on
the video.
Display Camera Name: There are two options: Yes or NO. Select Yes and you can see the device name
To Next Page
Loading...
Need help?
General
Weight and Dimensions
