3 Trigger interval--- The interval time between two motion detections. Here supports 5s / 6s / 7s / 8s / 9s
/ 10s / 11s / 12s / 13s / 14s / 15s. Select one interval time.
4 There are some alarm indicators:
A Camera Sound and PC Sound
If the camera has connected with a speaker or other audio output device, if you select Camera Sound or
PC Sound, when the motion has been detected, the people around the camera will hear beep alarm
sound.
B Send E-mail
If you want to receive alarm emails when motion is detected, you must select Send E-mail and set Mail
Settings first.
C Take Snapshot
If you select this checkbox, when the motion has been detected, the camera will snap the live view
window as a still picture and load it to the FTP. Make sure you have set FTP and set FTP as the storage
path in Video > Snapshot settings panel.
Time interval: The interval time between two pictures.
D Recording
If you select this checkbox, when the motion has been detected, the camera will recording and load it to
the FTP server. Make sure you have set FTP and set FTP as the storage path in Video > Snapshot
settings panel.
E Push message to the phone
If you select this checkbox, when the motion has been detected, the camera will push the message to
the phone which has been connected the camera.
5 Set Detection Area
Click set detect area and it pop up a window, then you can draw the detection area. Click Back button
after settings. When something moving in the detection area, the camera will alarm.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
