Start-up Option: Here section will allow you to set the stop position after the camera reboots.
It supports two modes: Go to home position and Go to preset point.
Disable Start-up: When rebooting, the camera will not pan / tilt.
Goto home position: When rebooting, the camera will pa Providing Central Management Software to
manage or monitor multi-cameras n / tilt and stops at center.
Go to Preset pointion: Select one preset position and save it. When rebooting, the camera will pan/ tilt and
stops at the preset position you have set.
4.6.6.2 Cruise Settings
This section explains how to add/ delete/ alter one cruise track.
To Next Page
Loading...
