CT 293 Cyclotec™
4:4 User Manual 6007 0581 / Rev. 3
4.4 Dust Collection Using External Connection
The external connection is used when the sample give rise to more dust than normal,
or when the standard dust filter pad fails to collect very fine dust.
To connect the mill to external system, exchange the dust pad for Part Number
60076071 and follow the instructions below:
1. Simply exchange the standard dust pad with the dust collector equipped with an
external connection. Connect this to your dust collection system. See
Fig. 4:4.
Fig. 4:4
2. To ensure that no dust escapes during use, make sure to press new cover firmly
against the grinding chamber.
To Next Page
Loading...
