CT 293 Cyclotec™
1:2 User Manual 6007 0581 / Rev. 3
1.2 Personal Safety
Warning
Electrical hazard. Covers or panels should be removed by
certified personnel only.
Caution
Use ear protection when operating the mills.
1.3 Product Safety
Caution
The responsible body shall be made aware that if the equipment
is used in a manner not specified by the manufacturer, the
protection provided by the equipment may be impaired.
Caution
The instrument is designed and tested for European (CE)
compliance. To ensure that this compliance is maintained,
connect only CE approved equipment.
Caution
The system may only be repaired by personnel certified by FOSS.
FOSS recommends the use of original FOSS spare parts. If spare
parts from other are used, the warranty no longer applies.
Warning
This device is equipped with a grounding/earthing type power
plug for your protection against electrical shock hazard and
should only be attached to a properly grounded/earthed
receptacle.
1.4 Disposal Instructions
Do not dispose of this electrical device with unsorted household
waste. Improper disposal may be harmful to environment and
human health. Please refer to your local waste authority for
information on return and collection systems in your area.
To Next Page
Loading...
