Fostex X-28 - Rehearsal Function

USING THE REHEARSAL FUNCTION:
The rehearsal function is also an important part ol
footswitch-controlled punch-in recording. When the
rehearsal function is engaged (its indicator in the
display will be lit), pressing the footswitch does not turn
the recording function on and off. Instead, it allows you
to practice the punch-in recording (without erasing the
original track), and to hear the new part replacing the
original in the monitor, just as if you were actually
recording.
When the REHEARSAL switch is turned on, the X-28
mimics the punch-in recording process by switching
the monitor between original track and the part to be
punched-in with each press of the footswitch.
Rehearsal
Take
PUNCH
IN
PUNCH
OUT
-^
New part is not recorded.
New pal is recorded
over original pari.
When - -
rehearsal Previous lake
function is heard,
is on.
New part is heard.
ji _i
Previous take
is heard
The TRANSPORT and REC TRACK indicators in the
display change as shown in the following diagram
during the rehearsal and punch-in/out processes.
PUNCH
IN
PUNCH
OUT
1-
^ i /
-D-
Rehearsal l ''' ■
(Hashes)
^ ^ \ 1 /
"
(both flash together)
. __j-
^ i ✓
^ i ^
^ i
^ i /
-n
a •
— ■ ■ —
Take i ^
i "
(both are lit continuously)
- Record track indicator
Q - Input monitor/record indicator
23