Foundations LX6 - Canopy Operation

To extend canopy:
1. Pull main canopy tube forward (1) (Fig. 1).
2. Rotate front section of canopy forward (2) (Fig. 1).
To retract canopy:
1. Rotate front section of canopy back over
top of canopy (1) (Fig. 2).
2. Pull main canopy tube toward rear of
stroller (2) (Fig. 2).
Fig. 1
Fig. 2
Main
Canopy
Front
Section
Front
Section
Main
Canopy Tube
Style May Vary
Canopy Operation
2
1
1 2
To remove canopy:
1. Open sides of canopy around stroller handle by
pulling fabric hook & loop fasteners apart
(Fig. 3).
2. Pull rear panel of canopy up and out of opening
between stroller handle and handle support .
3. Remove canopy from rear support tube by
releasing hook & loop fasteners.
4. Remove rear canopy tube (short tube) by pressing
retainer tab in and sliding rear canopy tube up
(Fig. 4).
5. Repeat step 4 for opposite side of stroller.
6. Remove main canopy tube (long tube) by pressing
retainer tab in and sliding main canopy tube up
(Fig. 4).
7. Repeat step 6 for opposite side of stroller.
Fig. 4
Retainer Tab
2
1
Fig. 3
1
2
1
1
2
1
2
1
2
17