Foundry Hardware Installation Guide for the FES, FESX, and FWSX
5 - 6 © 2006 Foundry Networks, Inc. June 2006
For example, to remove entries for the MAC address 000d.cb80.00d in all VLANs, enter the following command at
the Privileged EXEC level of the CLI:
FESX Switch# clear mac-address 000d.cb80.00d0
Syntax: clear mac-address <mac-address> | ethernet <port-num> | vlan <number>
If you enter the clear mac-address command without any parameters, the software removes all MAC entries.
Use the <mac-address> parameter to remove a specified MAC address from all VLANs. Specify the MAC address
in the following format: HHHH.HHHH.HHHH.
Use the ethernet <port-num> parameter to remove all MAC addresses for a specified Ethernet port.
Use the vlan <number> parameter to remove all MAC addresses for a specified VLAN.
To Next Page
Loading...
