To Next Page

To Previous Page

Chapter 3 BIOS Description

865G/GV/PE7MC User Manual

USB KB&MS Wake-Up From S3 (Default: Disabled)

This option is used to set the system to wake up by USB equipment when it is

in S3 (Suspend to RAM) mode.

Resume by Alarm (Default: Disabled)

This option is used to set the timing of the start-up function. In order to use this

function, the start-up password function must be canceled. Also, the PC power

source must not be turned off. The setting values are Disabled and Enabled.

Date (of Month) Alarm

This option is used to set the timing for the start-up date. The setting values

contain 0-31.

Time (hh:mm:ss) Alarm

This option is used to set the timing for the start-up time. The setting values

contain hh:0 – 23; mm:0 – 59; ss:0 – 59.

PnP/PCI Configurations

Resources Controlled By (Default: Auto (ESCD))

This option is used to define the system resource control scheme. If all cards

you use support PnP, then select Auto (ESCD) and the BIOS will automatically

distribute interruption resources. If the ISA cards you installed are not sup-

porting PnP, you will need to select “Manual” and manually adjust interrup-

tion resources in the event of hardware conflicts. However, since this

motherboard has no ISA slot, this option does not apply.

PnP/PCI Configurations Menu

Foxconn 865G User Manual

Questions and Answers: