EasyManuals Logo

Foxconn A76GMV User Manual

Foxconn A76GMV
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
Installation Precautions
Please carefully read the following procedures to install your computer :
It is suggested to select high-quality, certied fans in order to avoid damage
to the motherboard and CPU due to high temperature. Never turn on the
computer if the CPU fan is not properly installed.
We cannot guarantee that your system can operate normally when your
CPU is overclocked. Normal operation depends on the overclocking capac-
ity of your device.
If there is any, when connecting USB, audio, RS232 COM, IrDA or S/PDIF
cables to the internal connectors on the motherboard, make sure their
pinouts are matching with the connectors on the motherboard. Incorrect con-
nections might damage the motherboard.
When handling the motherboard, avoid touching any metal leads or connec-
tors.
If there is a PCI Express x16 graphics card installed in your system, we
recommend using a 24-pin ATX power supply to get the best performance.
Before turning on the power, please make sure the power supply AC input
voltage setting has been congured to the local standard.
To prevent damage to the motherboard, do not allow screws to come in contact
with the motherboard circuit or its components. Also, make sure there are no
leftover screws or metal components placed on the motherboard or within the
computer casing.
If you are uncertain about any installation steps or have a problem related to
the use of the product, please consult a certied computer technician.
C
A
U
T
I
O
N
!
Electrostatic discharge (ESD) is the sudden and momentary electric current
that ows between two objects at different electrical potentials. Normally it
comes out as a spark which will quickly damage your electronic equipment.
Please wear an electrostatic discharge (ESD) wrist strap when handling
components such as a motherboard, CPU or memory.
Ensure that the DC power supply is turned off before installing or removing
CPU, memory, expansion cards or other peripherals. It is recommended to
unplug the AC power cord from the power supply outlet. Failure to unplug
the power supply cord may result in serious damage to your system.
W
A
R
N
I
N
G
!

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Foxconn A76GMV and is the answer not in the manual?

Foxconn A76GMV Specifications

General IconGeneral
Memory channelsDual-channel
Number of memory slots2
Supported memory typesDDR3-SDRAM
Maximum internal memory8 GB
Supported memory clock speeds1066, 1333 MHz
System bus rate4.4 GT/s
Processor socketSocket AM3
Processor manufacturerAMD
Compatible processor seriesAMD Phenom II Dual-Core Mobile, AMD Phenom II Quad-Core Mobile, AMD Phenom II Triple-Core Mobile, AMD Phenom II X2, AMD Phenom II X3, AMD Phenom II X4, AMD Phenom II X6, AMD Phenom II X8
Maximum number of SMP processors1
USB 2.0 connectors3
Power fan connectorYes
Number of SATA II connectors4
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Firewire (IEEE 1394) ports0
Component forPC
Power source typeATX
Motherboard chipsetAMD 760G
Audio output channels5.1 channels
Motherboard form factormicro ATX
RAID levels0, 1
Supported storage drive interfacesSATA II
Graphics cardRadeon 3000
Parallel processing technology supportNot supported
Networking featuresGigabit Ethernet
BIOS memory size64 Mbit
Weight and Dimensions IconWeight and Dimensions
Width- mm

Related product manuals