3
43
BIOS Security Features
► Change Supervisor Password
This item is used to install or change supervisor password.
After you input Supervisor password, it then will ask you to
input user password optionally.
Load Optimal Defaults
Optimal defaults are the best settings of this motherboard. Always load the Optimal defaults after
updating the BIOS or after clearing the CMOS values.
Select this option and press Enter, it will pop out a dialogue box to let you load the defaults.
Select <OK> and then press <Enter> to load the defaults. Select <Cancel> and press <Enter>, it
will not load.
By this default, BIOS have set the optimal performance parameters
of system to improve the performances of system components. But if
the optimal performance parameters to be set cannot be supported by
your hardware devices (for example, too many expansion cards were
installed), the system might fail to work.
Save & Exit Setup
When you select this option and press <Enter>, a message will be displayed in the center of the
screen:
Select [OK] to save your changes to CMOS and exit the
program, select [Cancel] or <ESC> to return to the main
menu.
Exit Without Saving
If you select this option and press <Enter>, the following message
will be displayed in the center of the screen:
Select [OK] to exit CMOS without saving your modications,
select [Cancel] or <ESC> to return to the main menu.
Enter New Password :
Load Optimal Defaults?
[OK] [Cancel]
[OK]
Save configuration changes and exit setup?
[OK] [Cancel]
[OK]
Discard changes and exit setup?
[OK] [Cancel]
[OK]
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
BIOS Security Features
Scurity Settings
Help Item
Supervisor Password : Not Installed Enter or change the
User Password : Not Installed password.
Change Supervisor Password [Press Enter]
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit
F1:General Help F9:Optimized Defaults
[Press Enter]
To Next Page
Loading...
Need help?
General
Weight and Dimensions
