Foxconn G41MD Series User Manual

19
2
19

When you use the memory which supports 1333/1066, the jumper is used to overclock memory
frequency. and make the memory word at 1333MHz.
Set the jumper to pins 2-3 (as Status 1) , memory frequency will be 1066MHz. This is default
status. Set the jumper to pins 1-2 (as Status 2), memory frequency will be up to 1333MHz.
MEM_OC_1333
Status1
(Default)
Status1
1
2
3
1
2
3
 To overclock memory up to 1333MHz, you also need to use CPU which supports
1333.
 As a result of the memory brand and the chip’s difference, we do not guarantee that
the 1066MHz memory you used all can work steadily under 1333MHz.
CAUTION
!

Foxconn G41MD Series Specifications

General

Form Factor	Micro ATX
CPU Socket	LGA 775
Expansion Slots	1 x PCIe x16, 1 x PCIe x1, 2 x PCI
Onboard Video	Intel GMA X4500
Chipset	Intel G41
Memory Slots	2
Storage Interface	4 x SATA 3Gb/s
Audio	Realtek ALC662 6-Channel HD Audio
Rear Panel I/O Ports	1 x PS/2 keyboard, 1 x PS/2 mouse, 1 x VGA, 4 x USB 2.0, 1 x RJ-45, 3 x audio jacks
USB Ports	4 x USB 2.0 (rear), 4 x USB 2.0 (via headers)
Video Outputs	1 x VGA