EasyManuals Logo

Foxconn H67M Series User Manual

Foxconn H67M Series
109 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #109 background imageLoading...
Page #109 background image
5
102
9. Windows will display the partition of your system, you have to create partitions as
many as you wish, assign them C:, D: or E: drive names. After partitions were done,
you can press <Enter> to continue. It will ask you to format your hard disk, then
copy les...etc., until the whole Windows is setup.
10. You must always keep RAID diskette in the oppy drive during Windows XP
installation, otherwise, Windows may ask you to put it inside again by below
message. There are many times Windows XP may copy les from the oppy drive,
please remember.
11. Follow the Windows XP install processes to nish the set up.
Windows XP Professional Setup
The following list shows the existing partitions and
unpartitioned space on this computer.
Use the UP ad DOWN ARROW keys to select an item in the list.
● To set up Windows XP on the selected item, press ENTER.
● To create a partition in the unpartitioned space, press C.
● To delete the selected partitions, press D.
305251 MB Disk 0 at id 0 on bus 0 on iaStor [MBR]
ENTER=Install C=Create Partition F3=Quit
Unpartitioned space 305251 MB
Windows XP Professional Setup
Insert the disk labeled:
Intel Matrix Storage Manager driver
into drive A:
* Press ENTER when ready
F3=Quit ENTER=Continue

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Foxconn H67M Series and is the answer not in the manual?

Foxconn H67M Series Specifications

General IconGeneral
Form FactorMicro ATX
ChipsetIntel H67
SocketLGA 1155
Memory TypeDDR3
Maximum Memory32GB
Memory StandardDDR3 1333/1066
Memory Slots4
PCIe x1 Slots2
PCI Slots1
SATA Ports4 (SATA II), 2 (SATA III)
AudioRealtek ALC887 8-Channel HD Audio
LANRealtek 8111E Gigabit LAN
Video Ports1 x HDMI, 1 x DVI, 1 x VGA
USB Ports10

Related product manuals