Foxconn Rattler User Manual

3
35
USB Conguration
USB Conguration
► All USB devices
This item is used to enable or disable all the USB devices.
► EHCI Controller 1/2
This item is used to enable or disable USB 2.0 (EHCI) Support.
► USB Port 0/1/2/3/4/5/6/7/8/9/10/11/12/13
This item is used to enable or disable the USB port.
Version 2.10.1208. Copyright (C) 2010 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
USB Configuration
All USB Devices [Enabled]
EHCI Controller 1 [Enabled]
EHCI Controller 2 [Enabled]
USB Port 0 [Enabled]
USB Port 1 [Enabled]
USB Port 2 [Enabled]
USB Port 3 [Enabled]
USB Port 4 [Enabled]
USB Port 5 [Enabled]
USB Port 6 [Enabled]
USB Port 7 [Enabled]
USB Port 8 [Enabled]
USB Port 9 [Enabled]
USB Port 10 [Enabled]
USB Port 11 [Enabled]
USB Port 12 [Enabled]
USB Port 13 [Enabled]
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enabled/Disabled All USB Devices
Chipset

Foxconn Rattler Specifications

General

Brand	Foxconn
Model	Rattler
Category	Motherboard
Language	English