Foxconn Rattler User Manual

3
38
Security
► Administrator Password
This item is used to install or change administrator password. After you input administrator
password, it then will ask you to conrm the password.
► User Password
This item is used to install or change user password.
“HDD Security Configuration” appears only when you connect HDD to your system. Press “Enter”
key on the item “HDD 0:ST3160815AS” to enter into the “HDD Password Configuration” inter-
face, then press “Enter” on “Set HDD Password” to set, modify or clear HardDisk password. HDD
Password need to be installed for enabling Security.
Version 2.10.1208. Copyright (C) 2010 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Main Advanced Chipset Boot Security Save & Exit Quantum BIOS
Password Description
If ONLY the Administrator’s password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
If ONLY the User’s password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User will
have Administrator rights.
The password must be 3 to 20 characters long.
Administrator Password
User Password
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Set Setup Administrator Password
Security

Foxconn Rattler Specifications

General

Brand	Foxconn
Model	Rattler
Category	Motherboard
Language	English