Foxconn Rattler User Manual

3
37
Boot
Boot Conguration
►Setup Prompt Timeout
This item is used to set the number of seconds to wait for setup activation key.
65535(0xFFFF) means indenite waiting.
► Bootup Numlock State
This item is used to select the keyboard numlock state. The defaulte setting is [On].
► Quiet Boot
This item is used to enable/disable the quiet boot.
[Disabled] : Displays the normal POST messages.
[Enabled] : Displays OEM customer logo instead of POST messages.
► Fast Boot
This item is used to enable or disable boot with initialization of a minimal set of devices required
to launch active boot option. This is no effect for BBS boot options.
► CSM16 Module Version
This item is used to the version of the CSM16 module.
► Option ROM Message
This item is used to set the display mode for option ROM.
► Interrupt 19 Capture
When set to [Enabled], system will allow option ROMs to trap Int 19.
► HDD BootSector Write
This item is used to enable or disable write to hard disk sector 0.
► ZIP Emulation Type
This item is used to set the emulation type for ZIP drives.
Version 2.10.1208. Copyright (C) 2010 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Main Advanced Chipset Boot Security Save & Exit Quantum BIOS
Boot Configuration
Setup Prompt Timeout 1
Bootup Numlock State [On]
Quiet Boot [Enabled]
Fast Boot [Disabled]
CSM16 Module Version 07.64
Option ROM Messages [Force BIOS]
Interrupt 19 Capture [Disabled]
HDD BootSector Write [Normal]
ZIP Emulation Type [Floppy]
Boot Option Priorities
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Number of seconds to wait for
setup activation key.
65535(0xFFFF) means indefinite waiting.
Boot
1

Foxconn Rattler Specifications

General

Brand	Foxconn
Model	Rattler
Category	Motherboard
Language	English