Foxwell NT726TS - Getting Started; Powering up the Scanner

14
Next Generation Diagnostic Platform NT726TS User's Manual V1.0
Table 2-1 Technical Specifications
3 Getting Started
This section describes how to power on/down the scanner, provides brief
introductions of applications loaded on the scanner and display screen layout
of the scan tool.
3.1 Powering up the Scanner
Before using the NT726TS applications (including updating the scanner),
please make sure to provide power to the scanner.
The unit operates on any of the following sources:
●
Internal Battery Pack
●
External Power Supply
3.1.1 Internal Battery Pack
The tablet scanner can be powered with the internal rechargeable battery.
The fully charged battery is capable of providing power for 5 hours of
continuous operation.
Operation System
Android 9.0
Processor
Quad-core, 1.3GHz
Memory
1GB
SSD Hard drive
32GB
Communication
interface
Built-in WIFI 802.11 b/g/n Wireless LAN
USB2.0 OTG/standard USB 2.0 HOST
Bluetooth specification v2.1+EDR; Bluetooth 4.0 Low Energy
(LE) (10-20 m)
Built-in Battery
4000mAh, Lithium-polymer battery, chargeable via 5V USB
power supply
Protocols
ISO9141-2, ISO14230-2, ISO15765-4, K/L lines, Double K Line
SAE-J1850 VPW,SAE-J1850PWM,CAN ISO 11898,
High-speed, Middle-speed, Lows-peed and Single wire CAN,
KW81, KW82, GM UART, UART Echo Byte Protocol, Honda
Diag-H Protocol, TP2.0, TP1.6, SAE J1939, SAE J1939, SAE
J1708,Fault-Tolerant CAN,CAN FD, DOIP
Working Temperature
-10 to 70°C
Storage Temperature
-20 to 80°C
Operating Humidity
5%-95% Non-Condensing
Dimensions
236*124*38mm (L*W*H)
Weight
0.87kg (Main unit)