Franke A600 - MILK SYSTEM MANAGEMENT; Filling the Refrigeration Unit

04
01 02 03
4 4
4 4
4 4
4 4
05 06 07
i
Filling and emptying
Page 24
NOTE
For notes on cleaning the milk
system, see Chapter "Care of
the A600", p. 33.
Milk
The milk system is prepared semi-automatically after a cleaning or a fi lling procedure.
Please observe the instructions in the event messages.
Access to the event messages is through the dashboard and requires no login.
Preparing the milk system
Filling the refrigeration unit
(optional)
Drink quality
Incorrect handling of milk can lead to quality problems.
•Only clean containers should be fi lled with milk.
•Only use pre-cooled milk (2-5°C or 36-41°F).
•Only touch the intake hose, the inside of the milk container and
the milk lid after sanitizing your hands, or wear disposable gloves.
•Place the container lid with the suction hose only on a surface
that is clean.
Close the door.
Slide the milk container all the way in.
Attach the milk container lid.
Remove the milk container lid.
Fill the milk container with a ma-
ximum of 5liters of cooled milk.
Remove the milk container.The current cooling chamber
temperature is displayed.
Open the door and switch on
the refrigeration unit.