4
4
4
01 02
4
03
04
05 06
07
10
!
09
4
4
4 4
4
4
4
4
4
4
11
08
4
Care of the A600
Page 35
NOTE
Impairment of function
If the bean hopper and powder
container are not locked cor-
rectly, this may impair both the
function of the coff ee machine
and the product quality.
•Push the locking slide all
the way to the rear.
Cutting injuries/crushing
The powder container's convey-
or mechanism can cause cuts
or crushing injuries.
•Exercise care when cleaning
the powder container.
Attach the powder container.
Caution
Clean the powder container
with a cloth. Use detergent if
necessary. Rub out the powder
container with a dry cloth.
Close the door.Push the locking slide all the
way to the rear.
Lift the powder container up.
Empty the powder container.
Attach the bean hopper.
Rub out the bean hopper with a
dry cloth.
Lift up the bean hopper.
Empty the bean hopper.
NOTE
Soiling, formation of mildew
The bean hopper dries slowly and can continue to release moisture
during fi tting.
•Do not bring the bean hopper into direct contact with water.
•Only use a damp cloth for cleaning.
•Remove detergent residue.
Pull the locking slide all the way
to the front.
Open the door.
Cleaning the bean hopper and powder container (weekly)
Clean the powder chute with a brush.
To Next Page
Loading...
