Franke A600 - MACHINE RINSING AND SCREEN CLEANING; Rinse Coffee Machine Process

4 4
!
i
4
i
44
4
01 02
01 02
4
03
03
4
04
Care of the A600
Page 34
Cleaning and maintenance
Data transfer and individualization
My settings
Cleaning and maintenance
Data transfer and individualization
My settings
Clean the monitor screen.
Maintenance level appears.
Select Cleaning and maintenance. Select Wipe Protection.
The operating interface is
locked for 20 seconds.
You cannot cancel the locking
of the operating interface.
Locking lasts 20 seconds.
Switch to Maintenance level.
Cleaning the monitor screen
Select Rinse Coff ee Machine
and confi rm.
A600 is being rinsed.
•Rinsing is not a substitute for daily cleaning. Rinsing is necessary
to remove residue build-up in the coff ee and milk systems.
•The A600 automatically rinses after certain time intervals as well
as when it is switched on or off .
Warning
Danger of scalding.
Hot water is released during
rinsing.
• Do not touch the outlets or
the area beneath them.
•Do not place anything on
the drip grid.
Select Cleaning and mainte-
nance.
Switch to Maintenance level.
Rinse Coff ee Machine
Clean Flavor Station
Wipe Protection
Prepare Syrup System
Prepare milk system
Rinse Coff ee Machine
ERROR LOG fi les
Clean Coff ee Machine
ERROR LOG fi les
Clean Coff ee Machine
My settings
Data transfer and individualization
Cleaning and maintenance
Clean Flavor Station
Rinse Coff ee Machine
Prepare milk system
Prepare Syrup System
Wipe Protection