4
Care of the A600
Page 33
The factory-set PIN code is
1111.
Clean Flavor Station
Wipe Protection
Prepare Syrup System
Prepare milk system
Rinse Coff ee Machine
ERROR LOG fi les
Data transfer and individua-
lization
Cleaning and maintenance
Clean the steam wand
Starting the automatic cleaning
The machine guides you to the
next step.
After the cleaning cycle, the machine swit-
ches back to either the maintenance level or
to the energy saver mode.
Your Service technician can set the desired
option for you.
Follow the instructions on the
operating interface and confi rm
with Continue.
Empty the container
Wipe the steam wand with a cloth.
Select Clean Coff ee Machine or
Clean Flavor Station and confi rm.
Danger of scalding.
During cleaning, hot water and
steam are released repeatedly.
• Do not touch the outlets or
the area beneath them.
Empty the container.
Fill the container with cold water
and place under the steam wand.
Select Cleaning and maintenance.
Select Autosteam/Steam.
The steam wand is being rinsed.
Select Autosteam/Steam.
The steam wand is being cleaned.
Fill container to approx. 5cm
with cold water and 30 ml of
clean solution.
Place under the steam wand for
approx. 1 minute.
Switch to Maintenance level.
Authenticate with the PIN code
if necessary.
Cleaning the coff ee machine
Warning
To Next Page
Loading...
