6
• The maximum load of the door is 7kg. Do not sit on or lean on an open door or
place heavy objects on it. Meanwhile, please ensure that there is no object
between the door and the chamber. Otherwise, the oven may be damaged.
Cleaning and Maintenance
• Never use a steam cleaner to clean the oven. The steam may touch the
electronics and cause a short circuit.
• Scratches on the door glass can cause the glass to break. Do not use friction
cleaners, hardhead sponges, brushes or sharp metal tools to clean the door glass.
• Remove the side rack when cleaning. Make sure it is properly placed. Do not use
the oven until the side rack is installed.
III. Instructions for safe installation
Do not use the appliance if it is not properly installed in the cabinet.
• The oven will smell when it is used for the first time. Heating the empty oven (take
out the packaging materials) for 1 hour will effectively remove the odor.
• To ensure proper operation, the oven needs to provide sufficient cold air. Please
make sure that the supply of cold air is not affected (for example, by the insulation
bar in the cabinet). Make sure the cold air is not overheated by another source of
heat, such as a wood-burning stove.
• Power the oven before installation to ensure that it is well grounded.
• Before the oven is installed, it is recommended to remove the accessories in the
oven chamber first, so that it is easy to install the oven into the cabinet.
• Push the oven into the cabinet and align it, and secure the oven body with 2 wood
screws in the accessory bag.
• The length of the power cord is 1.3 meters. Please note that the distance between
the power cord and the socket should not exceed 1.3 meters.
To Next Page
Loading...
