11
Franke Mythos Water Hub
Franke Mythos Water Hub can only be connected to
designated electronic taps from Franke with
Check the details in the “Installation manual“,
Ambient conditions
The device may only be connected to a water
above sea level.
Connections
For the installation of Franke Mythos Water Hub,
separate power circuit with a suitable mains
necessary. Angle valves must already be installed.
General specications
Dispensing water types Filtered chilled water
Filtered carbonated water
Filtered ambient water
Filtered boiling water
Operation Operation via electronic tap
Parametrization
Minimum installation dimensions
Supply voltage
Load 7.5 A
Plug
UK version = Type G / BS 1363 British 3 Pins
Max. power consumption All in One:
Standby power consumption All in One:
IP rating IPx1
CE-UKCA
Filtered chilled water
Cooling principle Direct cooling
EN
To Next Page
Loading...
