15
Press the Reset / Standby button on the unit
6.
Notice: Do not interrupt the process by pressing
any button or unplugging the device. Otherwise,
unplugged and the process must be restarted
from step 3.
1.
knob will light up.
Notice:
supply.
CO₂ cylinder installation (“Installation
1.
reducing valve by turning it to the right until it
connection backwards.
Notice:
tightened so that a tight seal is formed. Some
gas may escape, and a hissing noise may be
heard. Keep tightening, until it can not get any
further. No more gas should be heard escaping.
the user interface will light up.
3. Install the front cover.
4. The unit cools down and heats up for approx.
use.
Notice:
established after using the product for a few
days.
Tap operation
Operation of electronic knob
▶ The electric knob in standby mode doesn’t react
on rotary movement.
▶
1
▶ Turn forward or backward the electronic knob to
choose desired kind of water - LED color is
2
▶ For continuous of chosen water hold
Deactivation: Release the knob.
3
▶
4
▶
the object surrounds the delivery opening of the
tap. This will prevent water from splashing.
EN
To Next Page
Loading...
