Franke Mythos - Selection of LED Intensity

16
LED color Function
Operation
LED
display
Press Press and hold Press 2x Press 3x
White Standby mode*
Activate
knob by
pressing
LED
- Lights
Red Boiling water
Continuous

releasing the
knob
1 l water
output
(interruption
by additional


(interruption by
additional

Running
Blue

water
Continuous

releasing the
knob

output
(interruption
by additional

1 l water output
(interruption by
additional

 Filtered water
Green
Cold "sparkling"
water
Light green
Cold "sparkling"
water "medium"
*No function with rotary movement
Selection of LED intensity


LED intensity.
To change the sleeping mode setting you have to
follow the below instruction.
1. Activate the tap by pressing the electronic knob
once.
 Press the electronic knob 5 times.
3. 
4. Turn the knob to the preferred setting by turning
the knob forward or backwards:
1. 
 
3. 
5. 

EN