9
4. “CAL. & INCL.” window: Scans between Calories and the Incline level
Displays user calories burnt. It will count from 0 to 999; unless a target value has been preset. When a
count of 999 has been reached with will start again from 0. If a target Calorie value has been set the prior
to the workout the count will begin at the target value and count down, when it reaches 0, the machine will
slow down and come smoothly to a stop. Current level of incline will be displayed level 0-15.
Please note: Calories burned is indicative only and for reference use only.
To accurately calculate calories burned there are a large number of factors that need to be taken into
consideration including age, gender, level of fitness. Other manufacturers calculate using different
average figures and user information, this is why there is often a discrepancy between different models of
treadmills.
5. “SPEED” window: Displays the current speed (km/h) during use.
During treadmill use the window will display 1.0-20 km/h. When setting a program the base speed will be
shown in this window.
6. Matrix window: During use the dot matrix display will show the users progress around a 400M track. Once
the track is complete the unit will beep once and the track will restart. The window will show program
information while setting one of the preset programs.
BUTTON FUNCTION:
1. “PROGRAM (PROG.)” Button：
In standby mode, press this button to choose “P1-P24…U1-U2-U3 -FAT”.
2. “START” button：With the power switch on and the safety key in place on the console, press this button and
the machine will start. There will be a beep and the machine will start counting down from 3. Once 0 is
reached the walking belt will start moving.
3. “STOP” button: Press this button to stop the machine;
4. “SPEED+”, “SPEED-” Buttons：While in standby mode these buttons will adjust values while the treadmill is
running they will adjust the speed up and down.
5. “INCLINE^”, “INCLINEv” Button: While in standby mode these buttons will adjust values while the treadmill
is running they will adjust the incline up and down.
6. Quick select incline buttons: Low (level 3), Medium (level 6), and High (level 9) pressing these buttons will
quickly set the incline level of the treadmill.
7. Quick select speed buttons: Fast (speed 9), Medium (speed 6), Slow (speed 3) pressing these buttons will
quickly set the speed of the treadmill.
8. Entertainment functions:
8.1 Input select:
This button selects the input for the inbuilt entertainment system. Pressing this button allows
selection between: iPhone/iPad or external device plugged into the 3.5mm audio input jack (AUX), USB
(USB), SD (SD) and Radio. If there is no USB or SD device installed, you can only choose between
iPhone/iPad and Radio.
To Next Page
Loading...
