Freeform F80 - Weekly Maintenance; Monthly Lubrication; Semi-Annual Maintenance

17
EVERY WEEK
Clean underneath the treadmill, following these steps:
1) Turn off the treadmill with the star/stop switch, and then unplug the power cord at the wall outlet.
2) Fold the treadmill into the upright position, making sure that the lock latch is secure.
3) Wipe or vacuum any dust particles or other objects that may have accumulated underneath the
treadmill.
EVERY MONTH -IMPORTANT!
Belt/Deck/Roller Lubrication
The mat/deck friction may play a major role in the function and life of your treadmill and that is why we
recommend you regularly lubricate this friction point to prolong the useful life of your treadmill.
You should apply the lubrication after approximately the first 20 hours of operation. We recommend
checking of the deck every 30 days.
How to check the running mat for proper lubrication:
1. Disconnect the main power supply.
2. Fold the treadmill up into the storage position.
3. Feel the back surface of the running mat.
If the surface is slick when touched, then no further lubrication is needed.
If the surface is dry to the touch, apply a suitable silicone lubricant.
This can be purchased from your local hardware store.
Lubrication instuctions below.
Please also check all assembly bolts are tight
EVERY 6 MONTHS
It may be necessary to lubricate your treadmill running deck at least once every six months to maintain
optimal performance of your treadmill.
1) Turn off the treadmill with the start/stop switch, and then unplug the power cord at the wall outlet.
2) Leave the treadmill for 15 mintues. Remove motor cover and vacuum any dust or lint out of the
motor area.
3) Lubricate the air shocks with Teflon based spray.