freightliner Run Smart ARGOSY User Manual

active fault codes are found. Tap the mode/reset but-
ton to scroll through the stationary screens. See
Fig. 4.17.
i.
Odometer
ii.
Trip distance
iii.
Trip hours
iv.
Select units
v.
Diagnostics
vi.
Clear screen (on vehicles with less than 255
miles on the odometer)
vii.
Engine miles
viii.
Engine hours
ix.
Engine oil level
x.
Setup
xi.
Back to odometer
Trip Distance
When the odometer reading is displayed, tap the
mode/reset button once for trip distance. Press and
hold the mode/reset button to reset trip miles to zero.
Trip Hours
When trip distance is displayed, tap the mode/reset
button once for trip hours. Press and hold the mode/
reset button to reset trip hours to zero.
SETUP
INFORMATION AMT
PUSH SET KEY TO
CHANGE SERVICE AMT
OR
S
INTERVAL XXXXX MILES
<−−LESS MORE−−> AMT
If Service Interval is set to MILES
SERVICE INTERVAL
OFF/ MILES /HOURS AMT
S
PUSH SET KEY TO
CHANGE SERVICE MI AMT
PUSH SET KEY TO
CHANGE SERVICE HR AMT
S
SERVICE INTERVAL
OFF/ MILES / HOURS AMT
If Service Interval is set to HOURS
INTERVAL XXXX HOURS
<−−LESS MORE−−> AMT
S
To more Setup Information
Go to Vehicle Information Screens
f040704
Return to
Idle Hours
From Service
Information
Screen
12/17/2004
Fig. 4.14, ICU4M Setup Information Screens (for service intervals)
PUSH SET KEY TO
CHANGE TARGET MPG AMT
TARGET MPG:
<−−LESS MORE−−>AMT
S
LCD LAMP
<−−OFF ON −−> AMT
S
DISPLAY BRIGHTNESS
<−−DARK LIGHT−−>AMT
S
S
PUSH SET KEY TO
CHANGE LCD LAMP AMT
PUSH SET KEY TO
CHANGE BRIGHTNESS AMT
PUSH SET KEY TO
CHANGE LANGUAGE AMT
PUSH SET KEY TO
CHANGE UNITS AMT
PUSH SET KEY TO
CHANGE PARAMETERS AMT
S
RESET PARAMETERS
<−− NO−−> AMT
UNITS
/ METRIC AMT
LANGUAGE:
FRENCH/SPANISH AMT
f040705
Go to Vehicle Information Screens
Go to Setup Information Screens
12/17/2004
ENGLISH
ENGLISH
12.3
S
YES
Fig. 4.15, Other Setup Information
Instruments
4.15

freightliner Run Smart ARGOSY Specifications

General

Brand	freightliner
Model	Run Smart ARGOSY
Category	Automobile
Language	English