Enabling Push Services
FRITZ!Box 4020 103
18.2 Enabling Push Services
A wizard is available in the FRITZ!Box user interface to guide
you step by step through the configuration of push services.
1. Open the FRITZ!Box user interface; see page 24.
2. Select “Wizards”.
3. Start the “Configure Push Service” Wizard.
The wizard guides you through the menus and dialogs to en-
able the push services.
18.3 Configuring Push Services
You can adjust the push services to your needs, and also dis-
able any or all push services.
1. Open the FRITZ!Box user interface; see page 24.
2. Select the “System / Push Service / Push Services”
menu.
3. To configure a push service, click the “Edit” button.
4. Configure various settings in the details.
The Help of the FRITZ!Box user interface presents com-
prehensive information on the settings of each push ser-
vice.
5. Click “OK” to save your settings.
In the Help of the FRITZ!Box user interface you can find de-
tailed instructions.
To Next Page
Loading...
