Fritz! 4020 Box - Cable

FRITZ!Box 4020 120
Cable
23.5 Cable
Network Cable (white)
Use
The network cable is used to connect computers and network
devices to the FRITZ!Box 4020.
• AVM recommends using a network cable no more than
100 meters long.
• Additional network cable is required if you would like to
use all of the FRITZ!Box 4020 network ports.
Extension
You can extend one or both ends of the network cable. You
will need the following components to extend the cable:
• Standard CAT-5 network cable
– When components of a category smaller than Cat 5
are used, reduced transmission rates may result.
– You can use both straight cables and crosslink ca-
bles.
• 1 standard RJ45 CAT-5 double coupling with a 1:1 pinout
All components are available from specialized vendors.
Replacement
The network cable is a standard cable.
• As a replacement, use a standard Cat-5 network cable.
Replacement cable is available from specialized vendors.