Fritz! 4020 Box - Connecting a Network Hub or Switch

Connecting a Network Hub or Switch
FRITZ!Box 4020 19
5.2 Connecting a Network Hub or Switch
You can connect a network hub or network switch to the
FRITZ!Box.
1. Insert the network cable included in the package into
the uplink port of the network hub or network switch.
You can also use any other network cable. For more in-
formation, see page 120.
2. Insert the free end of the cable into a LAN socket on the
FRITZ!Box.
The FRITZ!Box and the network hub are now connected with
each other.
In
fo
Inte
rnet
W
LAN
LA
N
Po
wer
WLAN
WLAN
WPS
WPS
1
LAN 1
LAN
2
LAN 2
LAN
3
LAN 3
LAN
4
LAN 4
Power
Power
WAN