Fritz! 4020 Box User Manual

FRITZ!Box 4020 12
LEDs
The button lock is configured in the FRITZ!Box user interface,
in the “System / Buttons and LEDs” menu on the “Keylock”
tab.
2.3 LEDs
The FRITZ!Box 4020 has five LEDs, which flash or light up to
display various connection statuses and events.
For the “Info” LED you can assign any event desired in addi-
tion to the preset events. For more information, read
Assigning Any Event to the “Info” LED on page 12.
Assigning Any Event to the “Info” LED
The “Info” LED on the upper panel of the FRITZ!Box signals
various events. Some events for which the “Info” LED flashes
or lights up are preset in the FRITZ!Box. You also have the op-
tion of assigning any other event to the “Info” LED.
1. Open the FRITZ!Box user interface; see page 24.
2. In the menu “System / Buttons and LEDs”, click the
““Info” Display” tab.
3. In the “Freely Selectable Options” area, select from the
““Info” LED” list the additional event which is to be as-
signed to the LED.
4. Then click the “Apply” button.
The “Info” LED now flashes not only for the preset events, but
also for the event you selected.

Fritz! 4020 Box Specifications

General

Brand	Fritz!
Model	4020 Box
Category	Switch
Language	English