Fritz! 4020 Box - Configuring Guest Access on the LAN 4 Port

FRITZ!Box 4020 94
Configuring Guest Access on the LAN 4 Port
Manually Registering a Wireless Device with the Wireless
Guest Access
1. Your guest starts the wireless LAN software of her or his
wireless device and searches for the guest network.
2. Your guests authorize themselves using the network key
you assigned.
The wireless LAN connection will be established.
Registering a Wireless Device with the Wireless Guest Access
via QR Code
1. Print out the QR code for your guest.
2. Your guest starts the QR code reader on his or her wire-
less device and reads in the QR code of the wireless net-
work.
The wireless LAN connection will be established.
Registering a Wireless Device with the Wireless Guest Access
via WPS
1. Your guest starts WPS on his or her wireless device.
2. In the “WLAN / Guest Access” menu, click the “Start
WPS” button.
The wireless LAN connection will be established.
16.2 Configuring Guest Access on the LAN 4 Port
For guests you can configure the network port “LAN 4” as a
guest access.
Features of the LAN Guest Access
• Guests can connect their laptops to the guest access
with a network cable.
• Guest devices can surf the Internet.
• Guest devices have no access to the home network.
• The access profile “Guest” is set for the LAN guest ac-
cess. This access profile can be edited in the “Internet /
Filters” menu on the “Access Profiles” tab.