Fritz! 4020 Box - Entering the Network Key on the Wireless Device

FRITZ!Box 4020 22
Entering the Network Key on the Wireless Device
3. Select the wireless radio network of the FRITZ!Box and
start connecting with WPS.
4. For this step you have two minutes: Press the “WPS” but-
ton on the FRITZ!Box briefly.
The wireless LAN connection will be established.
6.2 Entering the Network Key on the Wireless Device
You can establish a wireless LAN connection by entering the
FRITZ!Box network key on the wireless device.
The preset network key is printed on the bottom of the hous-
ing on the FRITZ!Box. A new network key can be entered in the
user interface.
1. If the “WLAN” LED on the FRITZ!Box is off, press the
“WLAN” button briefly.
The wireless radio network will be switched on.
2. Open the wireless LAN software on your wireless device.
In Windows 8.1, 8 and 7, do this by clicking the Wireless
LAN icon in the task bar.
3. Select the wireless radio network of the FRITZ!Box.
The preconfigured name of the wireless radio network
(SSID) is consists of “FRITZ!Box 4020” and two capital
letters, and is printed on the bottom of housing.
4. Click “Connect”.
5. Enter the network key of the FRITZ!Box in the wireless
LAN software.
6. Start the connection procedure.
InfoInfo
LANLAN
WLANWLAN
InternetInternet
PowePower
WLAN
WLAN
WPS
WPS