FRITZ!Box 4020 116
Cannot Establish a Wireless LAN Connection
Switching On the Computer’s Wireless LAN Adapter
The wireless LAN adapter in your computer must be ready for
operation. On many notebooks the built-in wireless LAN
adapter can be switched on by pushing a button or entering a
key combination.
For more information, see the manual of your computer.
Enabling the Wireless Radio Network of the FRITZ!Box
When the “WLAN” LED is off, press the “WLAN” button on the
FRITZ!Box.
The wireless network is switched on and the “WLAN” LED
lights up.
Announcing the Name of the Wireless Radio Network
If the wireless LAN software on your computer cannot find the
wireless radio network of the FRITZ!Box, configure the follow-
ing setting in the FRITZ!Box:
1. Connect a computer to the FRITZ!Box with a network ca-
ble; see page 18.
2. Open the FRITZ!Box user interface; see page 24.
3. Select “WLAN / Radio Network”.
4. Enable the option “Name of the radio network visible”.
5. Click “Apply”.
6. Remove the network cable and establish a connection
via wireless LAN.
Entering the Correct Network Key
If you establish the wireless connection manually, enter the
correct network key, which is found in the user interface of
your FRITZ!Box:
1. Connect a computer to the FRITZ!Box with a network ca-
ble; see page 18.
2. Open the FRITZ!Box user interface; see page 24.
To Next Page
Loading...
