Fritz! 6000 - Opening the User Interface

Opening the User Interface
Overview
Your FRITZ!Repeater has a user interface you can open in a web
browser on your computer, tablet or smartphone. In the user interface
you can configure your FRITZ!Repeater, enable or disable functions
and receive information on connections and interfaces.
Note
In the Mesh of a FRITZ!Box, the FRITZ!Repeater automatically adopts
certain settings from the FRITZ!Box (Mesh Master); see page36.
These settings can only be changed in the user interface of the FRITZ!
Box.
If you would like to configure unique settings for the FRITZ!Repeater in
the Mesh, you can disable adoption of the settings; see page52.
AVM Services for Diagnostics and Maintenance
The first time the user interface is opened, you will be asked whether
you consent to the use of AVM services for diagnostics and mainte-
nance. We recommend leaving the use of AVM services enabled. You
can change this setting at any time. For more information on AVM ser-
vices, see page48.
Instructions: Opening the User Interface (One FRITZ!Repeater)
If you are using only one FRITZ!Repeater in the home network of your
FRITZ!Box, open the user interface as follows:
1. Open a web browser on a computer, tablet or smartphone in the
home network.
2. Enter the address http://fritz.repeater.
FRITZ!Repeater 6000 44
User Interface
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •