Fritz! 6000 - Adopting Wi-Fi Settings from the Router (Fritz!Box)

Adopting Wi-Fi Settings from the Router (FRITZ!Box)
Overview
You can adopt the Wi-Fi settings of the router at the touch of a button.
You only need this feature if your router is not a FRITZ!Box, or if your
FRITZ!Box does not support Mesh.
In the Mesh of a FRITZ!Box, the FRITZ!Repeater automatically adopts
the Wi-Fi network settings when it is connected, and every time they
are changed in the FRITZ!Box; without Mesh, they are adopted only up-
on connection.
The Wi-Fi settings adopted are the Wi-Fi network name (SSID), Wi-Fi
network key, and the Wi-Fi encryption.
Instructions: Adopting the Router's Wi-Fi Settings at the Touch of a Button
1. Press the “Connect” button on the FRITZ!Repeater briefly.
The LED flashes.
2. Within 2minutes: Start the adoption of Wi-Fi settings at the touch
of a button (WPS) on the router (FRITZ!Box). The procedure de-
pends on the router you are using:
router Start Connecting
FRITZ!Box with “Connect” or
“Connect/WPS” or “WPS” but-
ton.
Press button briefly (1 second)
FRITZ!Box with “WLAN” or
“WLAN/WPS button”
Press and hold the button down
for at least 6seconds.
Other router See the documentation of the
router for instructions
FRITZ!Repeater 6000 51
User Interface: Access to Home Network Menu
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •