Fritz! 6000 - Connecting the FRITZ!Repeater with Another Mesh Repeater (Cascading)

Connecting the FRITZ!Repeater with Another Mesh Repeater
(Cascading)
Overview
In the Mesh of a FRITZ!Box you can connect several FRITZ! devices in
series as MeshRepeaters in order to expand the Wi-Fi network in one
direction. A MeshRepeater can be a FRITZ!Repeater, or a FRITZ!Pow-
erline device with Wi-Fi, or a FRITZ!Box configured as a MeshRepeater.
The hub in the Mesh is always a FRITZ!Box configured as a Mesh Mas-
ter.
Rules
• Cascade more powerful MeshRepeaters upstream from less pow-
erful MeshRepeaters.
Requirements
• There is already a MeshRepeater connected with the MeshMaster
(FRITZ!Box).
• For the existing MeshRepeater, Mesh is enabled, see page38,
and automatic adoption of the Mesh settings is enabled (user inter-
face: “Access to Home Network / Adopt settings enabled”).
• The FRITZ!Repeater you want to connect as an additional MeshRe-
peater is set to its factory settings; see page72.
Instructions: Connecting the FRITZ!Repeater with Another Mesh Repeater
1. Connect the power adapter included with delivery to the “Power”
socket on the FRITZ!Repeater.
FRITZ!Repeater 6000 40
Mesh
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •