Fritz! Fon WLAN 7390 User Manual

98
Suspending/Resuming a Call on the ISDN Line
Suspending/Resuming a Call on the ISDN Line
The “suspend/resume” feature, also technically known as
“terminal portability”, allows you to suspend an existing
connection and resume it at another point on the S
0
bus.
The connection can be resumed at a different ISDN termi-
nal device (such as an ISDN telephone) that is connected
to your BRI line along with the FRITZ!Box.
You will hear an acknowledgement tone to indicate that
the call has been successfully suspended. If you hear the
failure tone, this may indicate that you made a mistake, or
that the “suspend/resume” feature is not enabled on your
line. It is also possible that the parked-call ID you chose is
already in use.
You can resume the suspended call using another ISDN
device on the S
0
bus.
Call Tracing on the ISDN Line
You can use this function during a call or after the caller
hangs up. For more information about this feature, contact
your ISDN provider.
Suspending/Resuming a Call
P You are talking to a caller.
R Press the Hold button. Call 1 is now suspended.
s1<PC>s Dial the sequence shown at left. Type in a code
for the suspended call as <PC> (parked-call code).
The code can be any number between 0 and
99. You will need to enter this code again
when you resume the call.
Q
O
After the acknowledgement tone, the connection
is suspended. You can hang up the handset. The
call remains suspended at the ISDN provider’s
local switch for two minutes.
Call Tracing (MCID)
Rs39r Dial the sequence shown at left.

Fritz! Fon WLAN 7390 Specifications

General

Brand	Fritz!
Model	Fon WLAN 7390
Category	Network Router
Language	English