26
MAX/MIN
Press this key to view the MAX/MIN value of
Temperature / Humidity/rain rate/rain
day/wind/UVI/LIGHT/Absolute Pressure
LIGHT
/SNOOZE
Press this key to adjust LCD backlight brightness:
HI/MID/OFF
Hold this key to register new transmitter
Note:
1) When power on, press WIND/+ and PRESSURE /-key to reset the
weather station and clear all records memory, and clears all user
settings to default.
2) When power on, press TEMP. key to skip receive RF signal.
3) In Setting mode,pressing WIND/+or PRESSURE/- key select the
unit or scrolls the value; keeping press and holding WIND/+or
PRESSURE/- key for 2 second will increase/decrease digits in
great steps.
4) The setting procedure can be exited at any time by either pressing
the LIGHT /SNOOZE key or waiting for the 30-second time-out to
take effect.
6.4 Setting mode
Pressing the SET key for 2 seconds to enter setting model,the basic
settings can now be performed in the following order:
To Next Page
Loading...
