Fronius Acctiva Professional Flash - Tools and Measuring Devices; General; Tools Required; Ancillary Materials

49
EN
Tools and measuring devices
General "Tools and measuring devices" offers an overview and description of all equipment needed
to service the device professionally. This equipment includes:
- Tools required
- Measuring and testing equipment
Tools required - Torx screwdriver TX 20
- Torx screwdriver TX 25
- Slotted screwdriver 3 mm
- Slotted screwdriver 6.5 mm
- Cross-head screwdriver PH 2
- Socket wrench insert 8 mm
- Socket wrench insert 13 mm
- Flat spanner 10 mm
- Diagonal cutting pliers
- Needle-nosed pliers
- Combination pliers
- Torque screwdriver with bit insert 1 - 6 Nm
- Torque ratchet 6 - 15 Nm
Ancillary materi-
als
- Heat conductive paste (40,0009,0043)
- Application tool for heat conductive paste (roller 42,0435,0020)
- Cleaning materials (spray, paper)
- Cable ties