Do not dispose of used devices with domestic waste. Dispose of them according to the
safety rules.
Keep hands, hair, clothing and tools away from moving parts. For example:
- Cogs
- Feed rollers
- Wirespools and wire electrodes
Do not reach into the rotating feed rollers of the wire drive or into rotating drive compon-
ents.
The cover of the welding torch may only be opened while maintenance or repair work is
being carried out.
During operation
- Ensure that the cover is closed.
- Keep the cover closed.
Safety
WARNING!
Incorrect operation or poorly executed work can cause serious injury or damage.
▶
All activities described in these Operating Instructions may only be carried out by
trained and qualified personnel.
▶
All functions described in these Operating Instructions may only be used by trained
and qualified personnel.
▶
Do not carry out any of the work or use any of the functions described until you have
fully read and understood the following documents:
these Operating Instructions,
the enclosed "Safety rules" document,
all the Operating Instructions for the system components, especially the safety rules.
WARNING!
An electric shock can be fatal.
There is also a risk of injury from the emerging wire electrode.
Before commencing any of the work described in these Operating Instructions:
▶
Turn the power source mains switch to the "O" position
▶
Disconnect the power source from the mains
▶
Ensure that the power source remains disconnected from the mains until all work
has been completed
45
EN
To Next Page
Loading...
