Changing the torch neck, rotating the torch neck
Changing the
torch body
CAUTION!
Risk of burns from hot coolant and hot torch body.
▶
Before carrying out any work, allow the coolant and torch body to cool to room tem-
perature (+25 °C, +77 °F).
NOTE!
Some coolant will always remain in the torch body.
▶
Only remove the torch body with the gas nozzle pointing downwards.
NOTE!
Before fitting a torch body, ensure that the interface between the torch body and
the hosepack is clean and undamaged.
1 2
NOTE!
The torch body is in the 0° position when the dowel pin (1) on the hosepack enga-
ges in the locating hole (2) in the torch body.
58
To Next Page
Loading...
