Fronius MHP 280i G PM - Connecting the Welding Torch to the Wirefeeder; Connecting the Welding Torch to the Power Source and the Cooling Unit

Connecting the
welding torch to
the wirefeeder
3
4
8
5
7
6
9
10
1
* Only if the optional coolant con-
nections are fitted in the wirefeeder
and when using a water-cooled
welding torch.
Always connect the coolant hoses
according to their colour coding.
Connecting the
welding torch to
the power source
and the cooling
unit
1 2
* Only if the optional coolant connections are fitted in the cooling unit and when
using a water-cooled welding torch.
Always connect the coolant hoses according to their colour coding.
3
54