Fronius MHP 280i G PM - Technical Data; General; Gas-Cooled Welding Torch - MHP 280 I G PM

Technical data
General Voltage measurement (V-Peak):
- for manually-operated welding torches: 113 V
- for mechanically-driven welding torches: 141 V
Torch trigger technical data:
- U
max
= 50 V
- I
max
= 10 mA
The torch trigger may only be operated in accordance with the technical data.
The product conforms to the requirements of IEC 60974-7 / - 10 Class A.
Gas-cooled wel-
ding torch - MHP
280i G PM
I (ampere) 10 min/40°C
M21+C1 (EN 439)
40% D.C.* / 280 A
60% D.C.* / 220 A
100% D.C.* / 170 A
Ø
[mm]
[in.]
0.8-1.6
0.031-0.063
[m]
[ft. + in.]
5.85 / 7.85 / 9.85
19 / 26 / 29
0.55 A RMS
27 V AC
1-20 m/min
0.039-0.0787 ipm
* D.C. = Duty cycle
76