Fronius ROB 3000 - Technical Data

Technical data
Power supply (via
the Local-Net)
Condition minimum typical maximum
Supply voltage Continous opera-
tion
15 V
DC
24 V
DC
30 V
DC
Power consumption Supply voltage =
24V
50 mA 100 mA 300 mA
Standby power consumtion Supply voltage =
24V
50 mA 60 mA 80 mA
NOTE! The technical data given above were technically correct at the time of going to
print. We reserve the right to effect alterations.
Digital inputs
Condition Potential-free (LO) High-active (HI)
U
0
Input unused, no power consump-
tion
18 V
DC
0 V
DC
U
On
Switch-ON thresold 1,2 V
DC
6,6 V
DC
U
Off
Switch-OFF thresold 1,25 V
DC
6,5 V
DC
U
Hyst
Hysteresis 50 mV 100 mV
I
On
Input current in “make” operation - 10 mA 330uA
C
Input
Input capacity 47 nF 47 nF
U
Inv
Inversely poled input voltage 60 V
DC
(Max.) 60 V
DC
(Max.)
U
Max
Input overvoltage protection 100 V
DC
/ 42 V
AC
(Max.)
100 V
DC
/ 42 V
AC
(Max.)
NOTE! The technical data given above were technically correct at the time of going to
print. We reserve the right to effect alterations.
39
EN