34
The procedure for navigating the configuration menu and its submenus is as follows:
Use the "Up/Down" keys to select the desired menu item
Use the "Stop/Start" key to confirm the menu item, and reconfirm
any double-check prompt (e.g. "OK?")
Use the "Up/Down" keys as necessary to choose an item e.g. "Off/
On" or enter a value
Use the "Stop/Start" key to confirm what you have entered
If the cursor should move to another setting or position after con-
firmation of the previous setting, then the procedure described in
points (3) and (4) should be repeated
To exit the current menu:
Press the "Menu" key to return to the higher-level menu
For an example, see the explanation below of how to set the charging parameters:
Use the "Up/Down" keys to select the "Charging settings" menu
item
Use the "Stop/Start" key to confirm this menu item
1
2
3
4
5
6
1
2
To Next Page
Loading...
