35
EN
the display may vary depending on the selection made. If the "Pb-Wet" type of battery has
been selected in combination with the "RI" characteristic ("Curve") as in the example here,
then the title "Ah" is replaced by the "Charging time" setting.
Both the start and end time can be set for this charging time period. The starting time can
be deselected as required; the charging time then bases itself exclusively on the specified
charge end time following a manual charge start.
When applying the settings, the user will be guided through the menu in much the same
way as a wizard function.
The choice of settings for the "Charging settings" menu item will now be displayed:
Use the "Up/Down" keys to select the desired parameter (e.g.
"Cells")
Use the "Stop/Start" key to confirm the parameter
Use the "Up/Down" keys to set the desired value (e.g. "24" for the
number of battery cells)
Use the "Stop/Start" key to confirm what you have entered
3
4
5
6
To Next Page
Loading...
