SPECIFICATIONS
OM 0408SB1174-A
3
* With manual rotation
Features and Specifications SB1174
Working Width 74"
Transport Width 74"
Working Height 26"
Length 47 3/4"
Single/Dual Auger Single
Auger Diameter 15"
Auger Flighting Thickness 5/16"
Impeller Diameter 24"
Impeller Width 9"
Impeller Shaft Diameter 1 3/8"
Number of Impeller blades 4
Roller Chain 60
Drive sprocket (# of teeth) 12
Driven sprocket (# of teeth) 32
Chain idler Manual adjustment
Gearbox Manufacturer Comer
Gearbox Description Model T-281A
Tractor RPM 540
Impeller RPM 540
Auger RPM 200
PTO Manufacturer Comer
PTO Description 40
Skid Shoe Adjustable
Skid Shoe Material High carbon steel
End Plate Thickness 3/16"
Back Plate Thickness 11ga
Impeller Housing Thickness 11ga
Impeller Blade Thickness 1/4"
Side Panel Bottom Thickness 3/16"
Cutting Edge Welded
Cutting Edge Dimension 3/8" x 2"
Chute Base Standard
Parking Stand Standard
Hitch Category Cat. 1 & 2
Quick Hitch Compatibility
ASABE Compatible
Cat. 1 only
HP Requirements - min-max (hp) 20-50
Operating Weight (lbs)-hyd. rot. & defl. 715
Shipping Weight (lbs) 628
Approx. Set-up Time (min.) * 35
Chute Deflector Adjustment (standard) Manual
Chute Deflector Adjustment (option)
Hydraulic: cylinder (2"x5"), brackets, support, hoses & connectors
included.
Electric: actuator 5" - 75 lb brackets, hardware, switch & wires
included
Chute Rotation
Manual: worm gear w/ crank.
Hydraulic: 50cc hyd.motor, flow restrictor, hoses & connectors
included.
Chute
Two-part
To Next Page
Loading...
