EasyManua.ls Logo

Fry's Electronics FR-54RTR - Page 26

Fry's Electronics FR-54RTR
104 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22FR-54RTR User Manual
Section 3 - Conguration
MTU:
Reonnect Mode:
MAC address:
Clone MAC
address:
Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specic ISP. 1492
is the default MTU.
Select either Always-on, Manual, or Connect-on demand.
The default MAC address will be displayed.
The default MAC address is set to the WAN’s physical interface MAC address on the Broadband Router. You can
use the Clone MAC Address button to copy the MAC address of the Ethernet Card installed by your ISP and replace
the WAN MAC address with the MAC address of the router. It is not recommended that you change the default MAC
address unless required by your ISP.